---
title: "Access the Web GUI for Cisco 8800 Series Phone"
slug: "access-the-web-gui-for-cisco-8800-series-phone"
updated: 2026-05-06T11:02:08Z
published: 2026-05-21T21:28:43Z
canonical: "help.8x8.com/access-the-web-gui-for-cisco-8800-series-phone"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Access the Web GUI for Cisco 8800 Series Phone

## Objective

Access the web GUI of a Cisco 8800 Series phone to perform certain tasks.

## Applies To

- Cisco 8800 Series Phone

## Procedure

1. On the front of the phone, press the **Cog** button to access the settings.
2. Go to **Status** > **Network Status** > **IPv4 Status**
3. Note the IP address (this is what will be used to access the web GUI).
4. On a PC/Laptop connected to the same network as the phones open up a web page and enter the following https://[IP address]. If the device is in a factory reset state or is not provisioned to 8x8 services you may need to use http://[IP address].
5. Once you have access to the web GUI enter the login details making sure you log in as "Admin".

> [!NOTE]
> Note:
> 
> *Password can be found in devices list in Admin Console. If the device is in a factory reset state no password is required.*