---
title: "Accessing the Web Interface for Panasonic DECT Phones"
slug: "accessing-the-web-interface-for-panasonic-dect-phones"
updated: 2026-05-06T10:18:40Z
published: 2026-05-21T21:28:00Z
canonical: "help.8x8.com/accessing-the-web-interface-for-panasonic-dect-phones"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Accessing the Web Interface for Panasonic DECT Phones

## Objective

Accessing the web interface for Panasonic DECT phones.

## Applies To

- Panasonic DECT Phones

## Procedure

> [!WARNING]
> Important:
> 
> These devices have reached end of sale and support.In order to access the web interface of the Panasonic DECT wireless IP phone, *Embedded Web* must be turned on.

### Activate *Embedded Web*

1. On the handset, press the **Menu** soft key.
2. Scroll down to highlight **Setting Handset (wrench icon)** and press **Ok**.
3. Scroll down to **Other Option** and press **Ok**.
4. Scroll down to **Embedded Web** and press **Ok**.
5. Scroll up to **On** and press **Ok**.
6. You will hear a longer beep if done correctly.

> [!NOTE]
> Note:
> 
> *This setting only remains in place for five minutes. If you need to access the GUI again, you will need to re-enable* Embedded Web*.*

### Access the Web GUI

1. Ensure the base is plugged in.
2. Obtain the handset's IP address.
  1. Press the **Menu** soft key.
  2. Scroll down to **System Settings** and press **Ok**.
  3. Scroll down to **Status** and press **Ok**.
  4. Scroll down to **IPv4 Settings** and press **Ok**.
  5. Scroll down to **IP Address** and press **Ok**.
  6. Note **IP Address**.
3. On a computer on the same network as the phone, open a web browser.
4. In the browser address bar, enter: **https://** followed by the **IP address** obtained above and press **Enter**. This will take you to the Web GUI login page.
5. Log in with the following credentials. *(If the phone is not provisioned, log in with username admin and password admin.)*
  - **Username:** instoperatorid
  - **Password:** qgENGet4GQKQVVRyYXJm4LQL2NGVuhEtKzK3Gkz7LdWZFvtxB7CHdWkpkD9Q8WZt
6. Upon successful login, you will have accessed the Web GUI.

## Additional Information

If the above credentials do not allow you to log in, try the following:

- Username: admin
- password: adminpass