---
title: "Configure Grandstream WP816 and WP826 for 8x8 Services"
slug: "configure-grandstream-wp816-and-wp826-for-8x8-services"
updated: 2026-05-21T18:41:53Z
published: 2026-05-21T21:28:57Z
canonical: "help.8x8.com/configure-grandstream-wp816-and-wp826-for-8x8-services"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configure Grandstream WP816 and WP826 for 8x8 Services

## Objective

Manually configure your Grandstream Wi-Fi phones using the phone’s hardware and web interfaces.

## Applies To

- WP816 Cordless Wi-Fi IP Phone
- WP826 Cordless Wi-Fi IP Phone
- WP836 Cordless Wi-Fi IP Phone

## Procedure

> [!NOTE]
> Note:
> 
> *This process is for devices that are not pre-provisioned by 8x8.*

- [Wi-Fi Configuration](/support/docs/configure-grandstream-wp816-and-wp826-for-8x8-services#wi-fi-configuration)
- [Obtaining a Device’s IP Address for 8x8 Provisioning](/support/docs/configure-grandstream-wp816-and-wp826-for-8x8-services#obtaining-a-device’s-ip-address-for-8x8-provisioning)
- [Obtaining a Device’s MAC Address for 8x8 Activation](/support/docs/configure-grandstream-wp816-and-wp826-for-8x8-services#obtaining-a-device’s-mac-address-for-8x8-activation)
- [Manually Provisioning a Phone into Production on the 8x8 Service](/support/docs/configure-grandstream-wp816-and-wp826-for-8x8-services#manually-provisioning-a-phone-into-production-on-the-8x8-service)
- [Reset a Device to Factory Settings](/support/docs/configure-grandstream-wp816-and-wp826-for-8x8-services#reset-a-device-to-factory-settings)

### Wi-Fi Configuration

Before provisioning your WP816, WP826 or WP836 device, you must first enable and configure Wi-Fi, and then connect it to your Wi-Fi network.

1. Press the **Settings** softkey on the handset.

![PHONE_IMAGE1_SETTINGS_CROPPED_400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19862)
2. Scroll down to **Quick Network Configuration** and press the **Menu/OK** key.

![QUICK NETWORK CONFIG_400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19865)
3. Select **Via Local Device** and press the **Menu/OK** key.

![VIA LOCAL DEVICE_400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19863)
4. A list of available Wi-Fi networks will be displayed. Select your desired Wi-Fi network and press the **Menu/OK** key.

![WIFI SELECT 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19868)
5. Finally, enter your Wi-Fi settings and password, then press the **Connect** sofkey.

![WIFI CONNECT_400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19869)

### Obtaining a Device’s IP Address for 8x8 Provisioning

Once your device is connected to your network through Wi-Fi, you’ll need to obtain its IP address for later, when you manually provision your phone to 8x8’s service.

1. From the main screen, press the **Menu** soft key.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19860)
2. Select the **Status** icon and then press the **Menu/OK** key.

![MENU STATUS 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19864)
3. Scroll to **Network Status** and then press the **Menu/OK** key.

![STATUS - NETWORK STATUS - 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19866)
4. Scroll to **IP Info** and then press the **Menu/OK** key.

![IP INFO 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19867)
5. Take note of the device's displayed **IPv4 Address**.

![IP ADDRESS 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19861)

### Obtaining a Device’s MAC Address for 8x8 Activation

If you will activate the device on 8x8’s service using its MAC address, there are two ways to obtain it from the device.

#### **Obtain the MAC Address from the Device Label**

- Your device’s unique MAC address can be found on the label beneath the battery.

![MAC ADDRESS LABEL 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19879)

#### **Obtain the MAC Address from the Device Menu**

1. From the main screen, press the **Menu** soft key.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19860)
2. Select the **Status** icon and then press the **Menu/OK** key.

![MENU STATUS 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19864)
3. Scroll to **Network Status** and then press the **Menu/OK** key.

![STATUS - NETWORK STATUS - 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19866)
4. Scroll to **Wi-Fi** and then press the **Menu/OK** key.

![NETWORK STATUS - WIFI - 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19875)
5. Take note of the device’s unique **MAC** address, which is listed in the **WAN MAC** section.

![WAN MAC ADDRESS - 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19876)

### Manually Provisioning a Phone into Production on the 8x8 Service

Your device must be provisioned for 8x8 service before it can be activated and used with 8x8.

1. To begin, first note your device’s admin password, which is printed on the label beneath the battery, in the **P/W** field. ***Note****: After getting the password from the label, the handset needs to be on with the battery inserted to access the Web UI.*

![ADMIN PASSWORD LABEL - 400W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19873)
2. In a web browser on a computer connected to the same network as the phone, navigate to the phone’s assigned IP address, obtained earlier.

![GSWIFI_GUI_IP.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19877)
3. Enter the **Username** of **admin** and the default **Password** you obtained from the label under the device’s battery.
4. Click **Login**.

> [!NOTE]
> Note:
> 
> Entering the **Random code** is not required as a part of this process.

![GUI LOGIN PAGE - 800W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19872)
5. When prompted to change the **Admin Password**, enter your **Current Password** (the default password obtained from the label), enter a **New Password**, and enter that new password again into the **Confirm Password** field.
6. Click **Modify**.

> [!WARNING]
> Important:
> 
> This admin password is temporary. Once provisioning is complete, the device will be assigned a new secure password that can be looked up in 8x8 Admin Console. See [Get Device Information and Passwords in 8x8 Admin Console](/support/docs/device-administrator-user-web-gui-passwords-in-8x8-admin-console).

![WEB GUIO ADMIN PASSWORD LOGIN - 800W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19878)
7. Navigate to **Maintenance** > **Upgrade and Provisioning** > **Config File**.
8. In **Configure via Network** > **Config Upgrade via**, select **HTTPS** from the drop-down menu.
9. In **Configure via Network** > **Configure Server Path**, enter the following line:
  - **gsata.8x8.com/gswifi**
10. Click **Save and Apply**.
11. Allow several minutes for the phone to reboot and connect to the 8x8 servers.
12. Once rebooting is complete, your phone can be activated on 8x8’s service.

![PROVISIONING URL - 1000W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19870)

## Reset a Device to Factory Settings

Follow the steps below if there is ever a need to reset your device to factory settings.

> [!NOTE]
> Note:
> 
> For this procedure, you will need the phone’s current **IP address** and **admin password**, which you can obtain using the instructions above in this article.

1. Log in to the phone’s web GUI by navigating in a web browser to its current IP address.
2. Navigate to **Maintenance** > **Upgrade and Provisioning** > **Advanced Settings**.
3. Click the **Factory Reset** > **Start** button to initiate the reset.

![FACTORY RESET - SHORT - 1000W.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19874)
4. Click **OK** in the popup confirmation window. The device will reboot, and will be restored to its factory default settings, including the password printed on the device’s product label.

![FACTORY RESET 2 - CONFIRM.png](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/19871)

> [!WARNING]
> Important:
> 
> - To restore the phone’s connection to 8x8 services after a reset, you will need to re-provision it and then re-activate it.
> - Once the phone is reset and reprovisioned, its admin password will change again to a new password instead of the factory default, and can be looked up in 8x8 Admin Console: [Get Device Information and Passwords in 8x8 Admin Console](/support/docs/device-administrator-user-web-gui-passwords-in-8x8-admin-console).