---
title: "Connect and Pair Poly RealPresence Trio Visual+"
slug: "connect-and-pair-poly-realpresence-trio-visual"
updated: 2026-05-21T18:27:54Z
published: 2026-05-21T21:27:00Z
canonical: "help.8x8.com/connect-and-pair-poly-realpresence-trio-visual"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Connect and Pair Poly RealPresence Trio Visual+

## Objective

Connect and pair your Poly RealPresence and Trio Visual+ phone.

## Applies To

- Poly RealPresence
- Trio Visual+

## Procedure

> [!NOTE]
> **Note:**
> 
> Trio Visual+ only works with Peer-to-Peer calling. It does not work with 8x8 Meetings.

1. Connect the Logitech Webcam C930e (part of the Collaboration Kit) to the Trio Visual+.
2. Connect an HDMI cable from the Trio Visual+ to a monitor or TV.
3. Connect the Power Kit to the Trio Visual+ (PoE/PoE+ is also supported).
4. Once the Trio Visual+ gets an IP Address, the monitor or TV should display instructions on pairing the Trio Visual+ to the Trio 8800. ![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/10785?sv=2026-02-06&spr=https&st=2026-11-04T00%3A54%3A14Z&se=2026-11-04T01%3A54%3A14Z&sr=c&sp=r&sig=5RLCqZwNpP9AVR4v79jTQ4i3xlh7v9GN5%2Bq7sHgonP8%3D)
5. Tap the **Pair** button on the Trio Visual+.
6. On Trio 8800 Speakerphone, go to **Settings** > **Advanced** > (enter **MAC Password**) > **Network Devices**.
7. Under Available Devices, tap the Trio Visual+ named **FEO3AE**.
8. To complete the pairing, tap the **Pair** button again on the Trio Visual+.
9. If pairing is successful, a video should appear on the monitor or TV. ![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/10784?sv=2026-02-06&spr=https&st=2026-11-04T00%3A54%3A14Z&se=2026-11-04T01%3A54%3A14Z&sr=c&sp=r&sig=5RLCqZwNpP9AVR4v79jTQ4i3xlh7v9GN5%2Bq7sHgonP8%3D)