Enable and Connect to Wi-Fi on Poly Edge E Series Devices

Objective

Enable Wi-Fi on Poly Edge E series devices.

Applies To

• Poly Edge E Series

Procedure

To enable Wi-Fi:

1. Go to one of the following depending on your firmware revision    

   • Menu > Wifi.

   • Menu > Settings > Basic > Wi-Fi Menu.

2. Press the Select key to enable Wi-Fi.

3. Press Save.

4. Press Reboot.

To connect to Wi-Fi:

1. Do one of the following:    

   • Press the Scan softkey to scan for available networks and select the desired network to enter information as required by the networks security settings

   • Press the Other softkey to manually enter network settings, including SSID, Security type, and password.

2. Select Connect.