---
title: "How to set Algo 8180 as Ringer"
slug: "how-to-set-algo-8180-as-ringer"
updated: 2026-05-18T10:35:55Z
published: 2026-05-21T21:28:57Z
canonical: "help.8x8.com/how-to-set-algo-8180-as-ringer"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to set Algo 8180 as Ringer

## Problem

Algo 8180 functions as a pager, and not a ringer.

When the customer wants to use the Algo extension in a Ring Group, so it can alert by ringing over the speakers instead of paging.

## Solution

The Algo needs to be activated using SIP Credentials.

**How to factory reset the Algo:**

- If the Algo has already been activated using the Provisioning URL, then factory reset the device by navigating to the **System** tab and selecting the **Maintenance** tab.
- In the **Backup/Restore Configuration** section, select the **Restore Defaults** button.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/ALGO_8180_AC_FACTORY_RESET_01.png?sv=2026-02-06&spr=https&st=2026-11-03T21%3A30%3A27Z&se=2026-11-03T22%3A30%3A27Z&sr=c&sp=r&sig=lb2FYQ%2Fv82g8qw4O9nf%2B31E6nRVVYkV3jYGzvkQgT80%3D)
- Select **OK** when prompted.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/ALGO_8180_AC_FACTORY_RESET_02.png?sv=2026-02-06&spr=https&st=2026-11-03T21%3A30%3A27Z&se=2026-11-03T22%3A30%3A27Z&sr=c&sp=r&sig=lb2FYQ%2Fv82g8qw4O9nf%2B31E6nRVVYkV3jYGzvkQgT80%3D)
- Select the **Reboot** button when prompted. After a few minutes, the device will come back online in its factory default state, including the default password: **algo**.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/ALGO_8180_AC_FACTORY_RESET_03.png?sv=2026-02-06&spr=https&st=2026-11-03T21%3A30%3A27Z&se=2026-11-03T22%3A30%3A27Z&sr=c&sp=r&sig=lb2FYQ%2Fv82g8qw4O9nf%2B31E6nRVVYkV3jYGzvkQgT80%3D)

#### **Algo Setup with SIP Authentication:**

Log into the Algo and set the following for SIP registration (FOR SIP Integration only):

- Auth name = GUN/Username
- Page Extension = GUN/Username
- Auth Password = SIP Password
- URL = unsbc.8x8.com:5299
- Set as NON-SRTP

#### **SIP Registration:**

1. Navigate to the **Control Panel**.
2. Click **Basic Settings** > **SIP**.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/openAttachment-1.png?sv=2026-02-06&spr=https&st=2026-11-03T21%3A30%3A27Z&se=2026-11-03T22%3A30%3A27Z&sr=c&sp=r&sig=lb2FYQ%2Fv82g8qw4O9nf%2B31E6nRVVYkV3jYGzvkQgT80%3D)
3. Enter the **GUN into the Auth name and Extension**.
4. Enter the **SIP Password into the Auth Password**.
5. Enter **unsbc.8x8.com:5299 into SIP Domain**.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/openAttachment(52).png?sv=2026-02-06&spr=https&st=2026-11-03T21%3A30%3A27Z&se=2026-11-03T22%3A30%3A27Z&sr=c&sp=r&sig=lb2FYQ%2Fv82g8qw4O9nf%2B31E6nRVVYkV3jYGzvkQgT80%3D)

Finally, check the device status page, and it should show as Ring #1 Successful.

![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/image (6) (1).png?sv=2026-02-06&spr=https&st=2026-11-03T21%3A30%3A27Z&se=2026-11-03T22%3A30%3A27Z&sr=c&sp=r&sig=lb2FYQ%2Fv82g8qw4O9nf%2B31E6nRVVYkV3jYGzvkQgT80%3D)

# Reason

The Algo will only function as a pager when activated using our Provisioning URL.