---
title: "Pair a Yealink Handset with the W70B DECT Base Station"
slug: "pair-a-yealink-handset-with-the-w70b-dect-base-station"
updated: 2026-08-21T13:54:20Z
published: 2026-08-21T13:54:20Z
canonical: "help.8x8.com/pair-a-yealink-handset-with-the-w70b-dect-base-station"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Pair a Yealink Handset with the W70B DECT Base Station

## Objective

Pair or register a Yealink Handset with the W70B base station.

## Applies To

- Yealink W70B Base Station
- Yealink W76P/W79P Pro Base Station and Handset
- Yealink W59R/W59R Pro Handset
- Yealink W56H Handset

## Procedure

Before registering a handset, the base station will need to be placed in Registration mode.

### Enabling Registration Mode on the W70B Base Station

Long press ![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/11507(1)?sv=2026-02-06&spr=https&st=2026-11-04T00%3A20%3A48Z&se=2026-11-04T01%3A20%3A48Z&sr=c&sp=r&sig=RdTLVmwiFrHkXwiKzFDcEEnapSjqTu1QuO%2Fdl1A6ETg%3D) on the base station until the handset LED flashes. The base station will now be in Registration mode.

> [!NOTE]
> Note:
> 
> If the base station does not identify a DECT phone within 90 seconds, the registration mode will switch off automatically.

### Registering a New Handset to a Base Station

1. Press the **Reg** soft key to register the handset. The handset will now search for a base station in the registration mode.
2. After the handset is registered successfully, the phone prompts **Handset Subscribed** and **Base NO** (the last 4 characters of the connected Base’s MAC address).
3. After the handset is initialized successfully, an icon with the internal handset number and handset name appears on the phone screen.

> [!NOTE]
> Note:
> 
> You can also press **OK > Register Handset** and then select the desired base to register the handset. You need to enter the base PIN (default: 0000) after a base is found.