---
title: "Pair a Yealink W52P Handset with Base Station"
slug: "pair-a-yealink-w52p-handset-with-base-station"
updated: 2026-05-08T09:11:19Z
published: 2026-05-21T21:27:17Z
canonical: "help.8x8.com/pair-a-yealink-w52p-handset-with-base-station"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Pair a Yealink W52P Handset with Base Station

## Objective

Pairing a Yealink W52P handset with the base station.

## Applies To

- Yealink W52P DECT Handset

## Procedure

1. When the handset LCD screen prompts *“Press base paging 2s then press Reg.,”* long press the Wireless button on the base station until the registration LED flashes.
2. Press the **OK** soft key on the handset.
3. Select **Register Handset**.
4. Select the desired base and then press the **OK** soft key. The handset begins searching the base.
5. Press the **OK** soft key after searching a base successfully.
6. Enter the base PIN (default: 0000), and then press the **Done** soft key to complete registration.

> [!NOTE]
> **Note:**
> 
> You can also press the **OK** key to enter the main menu, and then select **Settings** > **Registration** > **Register Handset** and repeat steps 2-4 to register multiple base stations. After successful registration, the handset LCD screen prompts “Handset Subscribed” and “Base NO. (The last 4 characters of connected Base’s MAC address).” If the handset LCD screen prompts “Searching for Base,” check if your base station is powered on.