---
title: "Pairing Poly Rove Handset To B2 Base"
slug: "pairing-poly-rove-handset-to-b2-base"
updated: 2026-05-21T18:40:00Z
published: 2026-05-21T21:27:00Z
canonical: "help.8x8.com/pairing-poly-rove-handset-to-b2-base"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.8x8.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Pairing Poly Rove Handset To B2 Base

## Objective

Pairing a Poly Rove handset to an active B2 Base unit.

## Applies To

- Poly Rove B2 Base
- Poly Rove 30 Handset
- Poly Rove 40 Handset

## Procedure

1. **Press and hold** the button at the top of the **B2 Base** until it starts blinking green. ![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/9276?sv=2026-02-06&spr=https&st=2026-11-03T22%3A39%3A37Z&se=2026-11-03T23%3A39%3A37Z&sr=c&sp=r&sig=KYcoW86UbccTgQ6A4ZHL5Jf953znAs%2BJhGrfR0eBSYc%3D)
2. On the handset you wish to pair, press the **menu button**. ![](https://cdn.us.document360.io/e3a59e39-abd3-4423-964c-0a4008dc5673/Images/Documentation/9275?sv=2026-02-06&spr=https&st=2026-11-03T22%3A39%3A37Z&se=2026-11-03T23%3A39%3A37Z&sr=c&sp=r&sig=KYcoW86UbccTgQ6A4ZHL5Jf953znAs%2BJhGrfR0eBSYc%3D)
3. Navigate to **Settings** > **Connectivity** > **Register**.
4. Select the first empty slot.
5. Enter access/PIN code (The code will either be '0000' or the Pairing PIN listed under the User's Voice Basic Settings in Admin Console).
6. Press **Ok** and the handset should register.
7. Repeat steps 2-3 until all handsets are registered.
8. **Press and hold** the button at the top of the **B2 Base** until it stops blinking and is solid green.
9. To double-check that the handset is registered, you can press and immediately release the B2 Base button, and that will start paging all registered handsets.

### Alternative steps to pair the handset to the base:

1. Factory reset Base.
  1. Hold the push button for 20 seconds until the light turns solid red.
2. Factory reset handset.
  1. Deregister the handset.
  2. Initiate a factory reset.
    1. Press 3 lines.
    2. Select Settings.
    3. Select Reset Settings
      - Handset may ask for a pin.
        - Default PIN: 0000.
3. The base will go through the light cycles, and the handset will be in easy registration.
4. Once the base stabilizes, the handset will automatically register.

## Known Limitations

- Maximum of five concurrent calls when G722 codec is used on all calls.
- Maximum of four concurrent calls when G729a codec is used on all calls.
- When G722 codec is enabled on the base, even if all calls negotiate to G711 codec, the maximum number of calls is nine.
- SRTP cannot be enabled on this device in Admin Console. If this feature is required, create a case for 8x8 Support to enable it.
- Poly does not yet support SIP Publishes on Rove devices, so no quality metrics will be available in Analytics for 8x8 Work.

## Additional Information

Additional details and a video may be found on the [Poly knowledge base](https://support.poly.com/support/s/article/knova-46175-video-how-to-register-handsets-to-base-station-for-poly-rove).